It appears that your cart is currently empty
Order online or call us on (0)1821 670770 / +44 7734 345652
Now on Sale
5 Superb Large Size Carving Chisels b...
Five Superb early large size carving chisels and gouges all by Henry Taylor of Sheffield as follo...
Five Superb early large size carving chisels and gouges all by Henry Taylor of Sheffield as follows; 3/4" straight gouge with turned beech handle and brass ferrule. Cast steel. 7/16" back bent spoon gouge with turned hickory handle and brass ferrule Superb 1/2" deep spoon gouge with turned boxwood handle and brass ferrule 5/16" sow-back 'V' chisel with turned beech handle and brass ferrule 5/8" spoon gouge with turned walnut handle and brass ferrule Couple have very minor pitting but basicall...
£75.00
4 Early Antique Small Carving Chisels
4 very early antique small profile carving chisels and gouges with turned hickory handles. No mak...
4 very early antique small profile carving chisels and gouges with turned hickory handles. No makers name visible. Very clean 1/4" fishtail gouge 1/8" fishtail gouge again good clean condition Minute spoon chisel in good clean condition 3/16" spoon gouge (some pitting)
£45.00
Good Little Used Toothing Plane by Ma...
Good clean little used 7" long beech coffin-shaped toothing plane by David Malloch & Sons of ...
Good clean little used 7" long beech coffin-shaped toothing plane by David Malloch & Sons of Perth with full length original blade by Robert Sorby. Real nice one !!
£45.00
3 Good Bevel-Edged Chisels. Mathieson...
Three good little used thin bevel-edged chisels, 2 by Mathieson of Glasgow and the other by Woodc...
Three good little used thin bevel-edged chisels, 2 by Mathieson of Glasgow and the other by Woodcock of Sheffield. All have nice shape turned beech handles and brass ferrules and all are cast steel. Sizes are; 7/8", 5/16" and 1/4". All have good long blades.
£48.00
1 1/2" Wide Socket Firmer Chisel by R...
Good 1 1/2" wide socket firmer chisel by Robt Sorby of Sheffield with nice shape turned and cappe...
Good 1 1/2" wide socket firmer chisel by Robt Sorby of Sheffield with nice shape turned and capped beech handle. 8 1/2" long blade. 13 1/2" long overall.
£28.00
Early Traditional Scottsh 14" Long Ca...
Nice early (mid 19th century I would say) 14" long Traditional pattern Scottish cast metal panel ...
Nice early (mid 19th century I would say) 14" long Traditional pattern Scottish cast metal panel plane. Cove moulded front with curved rear and nicely stop chamfered top edge to the metal. Gunmetal lever cap and very nice over-stuffed walnut and rosewood infill. Fully enclosed rear handle and lovely moulded shape front bun. Comes with its original thick parallel iron by Ward which is cast steel. Slight pitting to the metal in places but nothing really considering its age. One of the oldest of...
£385.00
Good Set of 5 Stormont Sheffield Turn...
Good clean little used set of 5 large turning chisels by Stormont of Sheffield all with original ...
Good clean little used set of 5 large turning chisels by Stormont of Sheffield all with original matching turned beech handle with brass ferrules and original trade labels. Set includes; 7/8" roughing gouge, 1" round nose scaper, 1/2" double bevelled skew scraper, 1" straight scraper and a 3/4" straight scraper. Slight discolouration to the metal but nothing serious.
£68.00
RARE Early Tiger Maple Ogee Moulder
SUPERB & RARE early 19th century solid tiger (stripy) maple ogee moulder. Makers name has bee...
SUPERB & RARE early 19th century solid tiger (stripy) maple ogee moulder. Makers name has been over-stamped but I think it might be American. Full length original blade. Really nice example.
£45.00
Free returns within 30 days
Free U.K delivery on any Item
Latest Items Added
Millers Falls USA No. 14 Jack Plane
Early 1900's Millers Falls USA No. 14 (number 5 size) bench plane in fully original condition. Al...
Early 1900's Millers Falls USA No. 14 (number 5 size) bench plane in fully original condition. All original blaxck japanning, original stained beech handles and near full length original Millers Falls blade. Patented nickel plated hinged lever cap. Slight all over pitting to the metal.
£68.00
Little Used 10" Brass Back Gents Saw ...
Good clean little used 10" heavy brass back Gents saw with fully enclosed beech handle by Tyzack ...
Good clean little used 10" heavy brass back Gents saw with fully enclosed beech handle by Tyzack & Turner of Sheffield. Stamped No. 14B. One small area of slight pitting to one side otherwise very good. Fine teeth. 2 1/2" blade depth
£36.00
Good Record Sheffield No. 05 1/2 Jack...
Pretty good Record of Sheffield No. 05 1/2 jack plane. Most of the blue finish remains, original ...
Pretty good Record of Sheffield No. 05 1/2 jack plane. Most of the blue finish remains, original beech handles and full length replacement Stanley England blade. There is a small chip to the back corner of the casting which doesn't effect the use of the plane at all otherwise it is good.
£68.00
Stanley USA No. 6 Bench Plane. 1920's
Late 1920's vintage Stanley USA No. 6 bench plane in OK condition for its age. Some loss of origi...
Late 1920's vintage Stanley USA No. 6 bench plane in OK condition for its age. Some loss of original black japanning but very nice original rosewood handles with no cracks or damage. Old replacement Stanley England blade and very minor pitting to the sole.
£70.00
Unused Set of 6 William Marples Turni...
Completely unused set of 6 wood turning chisels in their original cardboard box by William Marple...
Completely unused set of 6 wood turning chisels in their original cardboard box by William Marples & Sons of Sheffield. Turned ash handles. Like new !!!!!
£75.00
Good Early Spiers of Ayr Steel Panel ...
Good early, 19th century. Spiers of Ayr 13 3/4" long dovetailed steel panel plane in very good co...
Good early, 19th century. Spiers of Ayr 13 3/4" long dovetailed steel panel plane in very good condition for its age. Gunmetal lever cap with the earliers small upside down Spiers stamp. Stunning dark rosewood infill with fully enclosed rear handle. Original backing iron but with a full length old replacement blade by Mawhood of Sheffield which produces a fine mouth. The metal work is all clean and free from pitting and the infill is in remarkably good condition for its age. There is a small ...
£375.00
18th Century 'V' Moulder by I KENDALL...
18th century 'V' type grooving moulder by JAMES KENDALL of Bristol (1765 - 1798). Nice early shap...
18th century 'V' type grooving moulder by JAMES KENDALL of Bristol (1765 - 1798). Nice early shape wedge with near full length original thin iron. Nice colour.
£45.00
Good 18th Century Hollow 17 by WILLIA...
Good, hardly used, 18th century hollow No. 17 by WILLIAM DIBB of York (-1800 - 1843). Almost mint...
Good, hardly used, 18th century hollow No. 17 by WILLIAM DIBB of York (-1800 - 1843). Almost mint condition with full length original think iron. Amazing for a plane of this age to be in this condition.
£28.00
popular products
Set of 3 Very Good Spoon Gouges by He...
Set of three very good early spoon gouges all with turned ash handles and brass ferrules and all ...
Set of three very good early spoon gouges all with turned ash handles and brass ferrules and all by Henry Taylor of Sheffield including one back bent one. 3/8" spoon gouge, 1/8" spoon chisel and a large 5/8" back bent spoon gouge. All in good condition with plenty blade left.
£50.00
Good Set of 3 Mathieson Glasgow Gouges
Good clean set of 3 cabinetmakers gouges by A. Mathieson & Son of Glasgow with matching turne...
Good clean set of 3 cabinetmakers gouges by A. Mathieson & Son of Glasgow with matching turned ash handles. All are cast steel with good long blades. All are 1/2" wide but of different curves.
£45.00
3 Good Bevel-Edged Chisels. Mathieson...
Three good little used thin bevel-edged chisels, 2 by Mathieson of Glasgow and the other by Woodc...
Three good little used thin bevel-edged chisels, 2 by Mathieson of Glasgow and the other by Woodcock of Sheffield. All have nice shape turned beech handles and brass ferrules and all are cast steel. Sizes are; 7/8", 5/16" and 1/4". All have good long blades.
£48.00
Good Little Used Pair of 7/8" Tongue ...
Good clean little used pair of 7/8" No. 8 tongue and groove planes by James Lumsden & Son of ...
Good clean little used pair of 7/8" No. 8 tongue and groove planes by James Lumsden & Son of Dundee. Both planes are in good condition with full length irons.
£45.00
Latest News
22 April
7 Best Antique Woodworking Planes for Beginners
Picking up an antique hand plane for the first time is a genuinely memorable experience. The heft of it, the...
Read more03 February
10 Tips for Spotting Rare Tools: A Beginner’s Guide to Valuable...
Ever wonder if that rusty old tool collecting dust in your garage might be a hidden treasure? For beginners venturing into...
Read more